Mather & Sons Pumps Incorporated

Fabricated steel discharge heads for vertical turbine pumps offer several advantages over cast iron discharge heads. Each fabricated head is custom designed to application specifications and has a unique feature set.  For example, fabricated heads for canned turbines feature special centerlined inlets and outlets above grade to connect your piping up to.  Things like sounding tubes and transducer ports can placed exactly where needed. In general fabricated discharge heads are heavier duty than cast discharge heads and will support more weight down the well, and larger motors fixed to the top of them. They are less inclined to cracking. The heavy solid weight of a fabricated discharge head provides a solid support to keep your mission critical pump motor running more smoothly than a lighter cast discharge. While fabricated discharge heads do require longer lead times and more up-front cost on your initial investment, the added features and benefits are often worth the upgrade. Because fabricated discharge heads are custom designed they are also useful to replace cast iron pump discharges that are no long manufactured.

American Marsh OSG ANSI pumps are used in harsh process pump applications in a variety of industrial markets. The OSG series ANSI pumps feature heavy duty castings, oversized shafts, oil lubrication, single row inboard and double row outboard bearings, outboard bearing impeller adjustment and choice of optional metallurgies.

Performance Characteristics:

• Capacities to: 7,000 GPM
• Heads to: 730 Feet
• Temperatures to: 500 F (260 C)
• Speed ranges: 3600 to 1200 RPM

Features & Benefits:

• Back pull-out to reduce maintenance down time. Meets ANSI B73.1 dimensional standards.
• Packed or mechanically sealed stuffing box options to meed aggressive applications.
• Impellers have back pump out vanes to keep the seal chamber free of debris.
• Thrust bearing adjustment to quickly dial back factory running tolerances.
• Oil lubricated bearing housing for superior cooling and extended bearing life.
• Available standard in Ductile Iron/Ductile Iron fitted or other alloy for application versatility.
• High efficiency semi-open impellers designed to handle process fluids.
• 150 lb. ANSI flange suction/discharge connections with centerline discharge and cast integral foot on casing for support. Optional 300 lb. flanges available.
• Sleeved or solid shaft to minimize deflection at stuffing box.
• Wide variety of stuffing boxes to meet application requirements.
• Bearing isolators to keep bearing housing clean and free of contaminents.

AMERICAN MARSH PUMP SELECTION SOFTWARE

American Marsh OSD ANSI pumps are used in harsh process applications in a variety of industrial pump markets. The OSD series ANSI B73.1 pumps feature heavy duty castings, oversized shafts, oil lubrication, single row inboard and double row outboard bearings, optional stuffing box cooling jacket, outboard bearing micromillimeter impeller adjustment and choice of optional metallurgies.  Commercial pump applications include: Boiler feed pumps, transfer pumps, and condensate return pumps.  Industrial pump applications include: Propane pumps, butane pumps, crude oil pumps, acid pumps, gasoline pumps, naphtha pumps, organic fluid pumps, petrochemical pumps, black liquor pumps, ammonia pumps, and cargo transfer pumps.

Performance Characteristics:

• Capacities to: 7,400 GPM
• Heads to: 985 Feet
• Temperatures to: 500 F (260 C)
• Speed ranges: 3600 to 1200 RPM

Features & Benefits:

• Back pull-out to reduce maintenance down time. Meets ANSI B73.1 dimensional standards.
• Packed or mechanically sealed stuffing box options for aggressive pumping applications.
• Micromillimeter thrust bearing adjustment to quickly dial back factory running tolerances.
• Optional bearing and stuffing box cooling jackets for higher temperatures.
• Oil lubricated bearing housing for superior cooling and extended bearing life.
• Available standard in Cast Steel/Cast Steel fitted or other alloy for pump application versatility.
• High efficiency reverse vane pump impellers designed to handle process fluids.
• 150 lb. ANSI flange suction/discharge connections with centerline discharge and cast integral foot on casing for support. Optional 300 lb. flanges available.
• Wide variety of stuffing boxes to meet application requirements.
• Single row inboard bearings for rigid shaft support.
• Bearing isolators to keep bearing housing clean and free of contaminents.
• Sleeved or solid shaft to minimize deflection at stuffing box.

AMERICAN MARSH PUMP SELECTION SOFTWARE

American Marsh vertical process sump pumps are used in a variety of aggressive applications. These pumps are used in commercial, industrial and municipal applications every day. The SOSM series vertical process pumps feature heavy duty OSD ANSI casings, oversized shafts, short bearing spans, optional metallurgies and lineshaft bearing material flexibility.

Due to the metallurgy available in the 460 Series OSD product line, fluid ends are available in a wide variety of exotic materials. Low Flow OSD models can also be used in the SOSM product offering.

Performance Characteristics:

• Capacities to: 7,400 GPM
• Heads to: 985 Feet
• Temperatures to: 500 F (260 C)
• Speed ranges: 3600 to 1200 RPM

Features & Benefits:

• Heavy duty casings and impellers.
• Available standard in Cast Iron/Iron fitted or other alloy for application versatility.
• Replaceable wearing components include casing wear rings to maintain peak efficiency.
• Reverse vane or semi-open impeller design, hydraulic and dynamic balancing increasing performance and pump life.
• 125 lb. ANSI flange suction/discharge connections.Heavy duty, grease lubricated thrust bearing and oversized lineshaft and inboard head bearings.
• Lineshaft bearings can be supplied in bronze, cast iron, carbon graphite, teflon or metal backed marine material.
• Pump setting flexibility to depths of 25+ feet.
• Optional stuffing box.
• 4 foot to 5 foot maximum lineshaft bearing spans.
• Internal lubrication for flushing lineshaft bearings.
• Optional oil filled support column.

AMERICAN MARSH PUMP SELECTION SOFTWARE

American Marsh centrifugal vertical sump pumps are used in a variety of aggressive applications. These pumps are used in commercial, industrial process pumping and municipal applications every day. The SREM series vertical process pumps feature heavy duty casings, oversized shafts, short bearing spans, optional metallurgies and lineshaft bearing material flexibility.

Performance Characteristics:

• Capacities to: 9,000 GPM
• Heads to: 450 Feet
• Temperatures to: 300 F (150 C)
• Speed ranges: 3600 to 1200 RPM

Features & Benefits:

• Heavy duty pump casings and impellers.
• Available standard in Cast Iron/Iron fitted or other alloy for application versatility.
• Replaceable wearing components include casing wear rings to maintain peak efficiency.
• Enclosed impeller design, dynamic balancing and renewable wear rings reduce losses increasing performance and pump life.
• 125 lb. ANSI flange suction/discharge connections.
• Heavy duty, grease lubricated thrust bearing and oversized lineshaft and inboard head bearings.
• Lineshaft bearings can be supplied in bronze, cast iron, carbon graphite, teflon or metal backed marine material.
• Pump setting flexibility to depths of 25+ feet.
• Optional stuffing box.
• 4 foot to 5 foot maximum lineshaft bearing spans.
• Internal lubrication for flushing lineshaft bearings.
• Optional oil filled support column.

AMERICAN MARSH PUMP SELECTION SOFTWARE

American Marsh vertical end suction inline centrifugal pumps are used in commercial, industrial and municipal applications every day. The REI 310 series end suction products feature back pull out impellers, inline suction and discharge, cast iron integral base on all casings with heavy casing thickness, impellers with back pump out vanes and oversized shafts to provide the end user with a superior, reliable product.

Performance Characteristics:

• Capacities to: 9,000 GPM
• Heads to: 450 Feet
• Temperatures to: 300 F (150 C)
• Speed ranges: 3600 to 1200 RPM

Features & Benefits:

• Back pull-out to reduce maintenance down time.
• Standard American-Marsh Series 810 mechanical seal for both reliability and dependability.
• Carbon/Si-Carbide/EPDM elastomers standard, with other faces and elastomers available.
• Integral seal flush.
• Available standard in Cast Iron/Bronze fitted or other alloy for application versatility.
• Replaceable wearing components include casing wear rings to maintain peak efficiency.
• Enclosed impeller design, dynamic balancing and renewable wear rings reduce losses increasing performance and pump life.
• 125 lb. ANSI flange suction/discharge connections with centerline discharge and cast integral foot on casing for support. Suction and discharge flanges are casted to 250 psi dimensions. Case working pressures for all REF models is 250 psi.
• Standard, stocked c-face motors for quick shipment.
• Pumps can be stocked and shipped less driver allowing more flexibility for the end user.
• C-face motor bracket allows the removal of the driver without disassembling entire pumping unit.
• Impellers have back pump out vanes to keep the seal chamber free of debris.

AMERICAN MARSH PUMP SELECTION SOFTWARE

American Marsh flex coupled end suction centrifugal pumps are used as general purpose pumps in commercial, industrial and municipal applications every day. The REF series end suction products feature back pull out impellers, centerline discharges, cast integral feet on all casings with heavy casing thickness, impellers with back pump out vanes and oversized shafts to provide the end user with a superior, reliable product.

Performance Characteristics:

• Capacities to: 9,000 GPM
• Heads to: 450 Feet
• Temperatures to: 300 F (150 C)
• Speed ranges: 3600 to 1200 RPM

Features & Benefits:

• Back pull-out to reduce maintenance down time.
• Standard American-Marsh Series 810 mechanical seal for both reliability and dependability. Carbon/Si-Carbide/EPDM elastomers standard, with other faces and elastomers available.
• Internal seal flush.
• Available standard in Cast Iron/Bronze fitted or other alloy for application versatility.
• Replaceable wearing components include casing wear rings to maintain peak efficiency.
• Enclosed, francis impeller design, dynamic balancing and renewable wear rings reduce losses increasing performance and pump life.
• 125 lb. ANSI flange suction/discharge connections with centerline discharge and cast integral foot on casing for support. Suction and discharge flanges are casted to 250 psi dimensions. Case working pressures for all REF models is 250 psi.
• Optional rigid carbon steel bedplate and OSHA coupling guard.
• Impellers have back pump out vanes to keep the seal chamber free of debris.
• Oil lubricated power frame for cooler bearing operation. All REF pump models feature bearings with a minimum 100,000 hour design life.

AMERICAN MARSH PUMP SELECTION SOFTWARE

American Marsh close coupled end suction centrifugal pumps are used as general purpose pumps in commercial, industrial and municipal applications every day. The REC series end suction products feature back pull out impellers, centerline discharges, cast integral feet on all casings with heavy casing thickness, impellers with back pump out vanes and oversized shafts to provide the end user with a superior, reliable product.

Performance Characteristics:

• Capacities to: 9,000 GPM
• Heads to: 450 Feet
• Temperatures to: 300 F (150 C)
• Speed ranges: 3600 to 900 RPM

Features & Benefits:

• Back pull-out to reduce maintenance down time.
• Standard American-Marsh Series 810 mechanical seal for both reliability and dependability.
• Carbon/Si-Carbide/EPDM elastomers standard, with other faces and elastomers available.
• Integral seal flush.
• Available standard in Cast Iron/Bronze fitted or other alloy for application versatility.
• Replaceable wearing components include casing wear rings to maintain peak efficiency.
• Enclosed impeller design, dynamic balancing and renewable wear rings reduce losses increasing performance and pump life.
• 125 lb. ANSI flange suction/discharge connections with centerline discharge and cast integral foot on casing for support. Suction and discharge flanges are casted to 250 psi dimensions. Case working pressures for all REF models is 250 psi.
• Standard, stocked c-face motors for quick shipment.
• Pumps can be stocked and shipped less driver allowing more flexibility for the end user.
• C-face motor bracket allows the removal of the driver without disassembling entire pumping unit.
• Impellers have back pump out vanes to keep the seal chamber free of debris.

AMERICAN MARSH PUMP SELECTION SOFTWARE

The GI Internal Gear pumps operate smoothly and with equal efficiency in either direction. They efficiently handle both thin and
thick liquids and are designed for a broad range of applications at various flows and pressures. They are also capable of operating
under a suction lift condition. Pumps are available in several materials of construction with or without relief valves. Pumps can be supplied with conventional packing or mechanical seal. Available with 90 degree ports, which can be rotated in 45 deggree increments.

Performance Characteristics:

• Capacities to: 400 GPM
• Heads to: 462 Feet
• Temperatures to: 300 F (150 C)
• Speed ranges: 1800 to 500 RPM

Features & Benefits:

• Heavy cast iron gears for long life and durability.
• Packed stuffing box standard. Optional American-Marsh Series 810 mechanical seal for both reliability and dependability. Carbon/Si-Carbide/EPDM elastomers standard, with other faces and elastomers available.
• Large variety of shaft bushings available.
• Optional relief valve.
• Thrust control and adjustable clearances.
• Optional rigid carbon steel bedplate and OSHA coupling guard.

AMERICAN MARSH PUMP SELECTION SOFTWARE

These helical gear pumps operate smoothly and with equal efficiency in either direction of operation when the relief is in the proper position. They efficiently pump heavy, viscous materials such as asphalt, molasses, roofing compounds and printing inks; as well as fuel oils, gasolines and similar thin liquids.

Amercian Marsh gear pumps are available in several materials of construction with or without relief valves. Gear pumps can be supplied with conventional packing or mechanical seal.

Performance Characteristics:

• Capacities to: 400 GPM
• Heads to: 289 Feet
• Temperatures to: 300 F (150 C)
• Speed ranges: 900 to 100 RPM

Features & Benefits:

• Heavy cast iron gears for long life and durability.
• Packed stuffing box standard. Optional American-Marsh Series 810 mechanical seal for both reliability and dependability. Carbon/Si-Carbide/EPDM elastomers standard, with other faces and elastomers available.
• Large variety of shaft bushings available.
• Optional relief valve.
• Optional rigid carbon steel bedplate and OSHA coupling guard.

Our long tradition of quality pump manufacturing began in 1873 making us one of the first pump manufacturers in this country. American-Marsh Pumps provides the user dependability and durability. Durability by design is always the most cost effective solution. Nearly all designs are available in alternate metallurgy constructions.

Heavy Duty Integral Base
• Casted or fabricated steel designed and sized for the pump and its application
• The base can be designed for close-coupled or flexcoupled, shaft driven driver

Shaft Sleeve
• Standard - replaceable bronze sleeve protects shaft from wear and corrosion

Stuffing Box
• When packed, supplied with a bronze lantern ring and gland
• When sealed, supplied with an American-Marsh Series 810 Carbon/Silicon-Carbide/EPDM mechanical seal
• Other component and cartridge seals available on request

Upper Bearing Housing
• Heavy duty deep groove type, double row bearing, purge grease type lubrication standard and is cartridge mounted to permit easy removal of rotating element
• Double row roller bearing is protected by a lip seal to keep contaminates out of bearing housing
• Double row bearing carries both the radial and axial forces generated by the rotating assembly

Heavy Duty Shaft
• Designed and sized especially for the pump and its applications
• 420 stainless steel shaft standard

Drivers
• Assemblies can be close- or flex-coupled engineered to customer specifications

OVERVIEW:

SINGLE PHASE:
■ Single Phase, 6" motors available in 5 - 15 HP, 230 volt models.
■ Require CentriPro Control Boxes as shown on Order Number chart.

THREE PHASE:
■ Three Phase, 6", 5 - 30 HP, 230 and 460 volt models have an exclusive voltage change plug feature.
■ 6 - 10" Three Phase available from 5 - 200 HP in 200, 230, 460 and 575 volt models.

FEATURES:

6" Canned Design Motor Features

• Replaceable Plug-in Motor Lead - All 6" motor leads are stranded copper for flexibility and strength. Leads are 150" long and field replaceable.
• Insulation - The canned motor's stator coil is mounted in a stainless steel frame and is completely sealed in a stainless steel cylinder. The coil wire features moisture resistant insulation which is completely water-proofed for long life.
• Heat Resistant - The space between the stator's stainless steel protective can and its frame is filled with a specially formulated patented resin that protects the motor against thermal fluctuation and internal stress.
• 95º F (35º C) Water Temperature (CANNED TYPE: 6", 5 - 50 HP) - The motors operate with a minimum flow rate of 0.5 ft./sec. (0.15 m/sec) in water temperature up to 95º F (35º C) without any derating of horsepower. This 95º F (35º C) temperature is 18º F (10º C) higher than NEMA standards.

8-10" Rewindable Water-Tight Motor Features

• Insulation Wire - The coil conductor insulation material is a specially developed denatured polypropylene, which offers excellent leak-resistant characteristics. Three barriers are applied to the copper conductors to provide complete insulation against the motor's cooling fluid. This design is the result of extensive research and is of superior quality. It insures that CentriPro motors will have an extremely long service life. Motor Features - Both Designs
• Sand Resistant Slinger and Lip Seals - CentriPro submersible motors feature double-row, grease packed, lip seals to prevent sand from entering the motor. A carbon steel slinger with a baked on epoxy coating prevents sand from entering the lip seal area. Additional protection against sand intrusion is provided by the close tolerance slinger guide with a .02" fit. This design is field-proven in West Texas wells which are considered to be some of the worst sandy well applications. Best of all, these features are standard for a CentriPro motor, so there is no need to stock one motor for clean wells and another more
expensive motor for the more abrasive, sandy jobs.
• High Torque Characteristics - The stator laminations are constructed of high quality, electrical grade, silicon steel which provide high torque even when the motor is subjected to nominal voltage variations.
• Balancing - The rotor balance rings (one on each end of the rotor) allow for excellent dynamic balance for the rotating element of the motor.
• Carbon Sleeve Bearings - Two carbon, water-lubricated, guide bearings are used to properly align the shaft. The bearings have a large surface area to better support the shaft, reducing whipping, while acting as a steady bushing.
• Water-Filled Design - The internal cooling water is mixed with antifreeze and antirust liquid to allow the motor to be stored at -22º F (-30º C). Two water plugs are provided for filling or draining the antifreeze fluid during maintenance. These plugs are also used to top off and to check the water level.
• Complete Corrosion and Water-Tight Protection - All main motor components are made of stainless steel: including the can housing (water tight type motors have baked epoxy coated carbon steel housings), shaft and bolts. All other motor parts are finished with the baked epoxy coating.
• Baked Epoxy Coating - All external and internal cast iron parts are coated with a baked epoxy resin that provides excellent resistance to water and corrosion.
• Quality Control - All CentriPro submersible motors are manufactured and tested under the most stringent quality control procedures, providing long service life and trouble-free operation.

Quick Disconnect Control Boxes for 4", 1Ø, 3-Wire Submersible Well Water Pump Motors

Features
■ Voltage Relays for installer convenience
■ 115 and 230 volt models
■ 208 volt relay, 9K461, available for low voltage applications
■ Start Capacitors
■ NEMA 3R enclosure for indoor or outdoor mounting
■ Quick disconnect cover design will retrofit with F.E. Q-D control boxes
■ Multiple knockouts
■ Two grounding lugs

Magnetic Contactor 1Ø Well Water Pump Control Boxes
For 3-wire, 1½ - 5 HP Submersible Motors

Features

■ Built-in Magnetic Contactors allow the use of standard pressure switches, prolong switch life and eliminate the need to source and install separate contactors, saving installation time and reducing total system component costs.
■ Voltage Relay for installer convenience
■ 230 volt standard models - 208 volt relay, 9K479 available for low voltage applications
■ Start Capacitors for starting torque
■ Run Capacitors for efficiency and quiet operation
■ Type 3R enclosure for indoor or outdoor mounting
■ Accepts up to #2 AWG wire
■ Multiple knockouts and two ground terminals
■ Manual reset overloads on 1½ - 5 HP models

Capacitor Start - Capacitor Run Control Box for 3-wire, ½ HP - 5 HP Submersible Pump Motors

Features

■ Voltage Relay for installer convenience
■ 230 volt models - 208 volt relay, 9K479, available for low voltage applications
■ Start Capacitors for starting torque
■ Run Capacitors for efficiency and quiet operation
■ Type 3R enclosure for indoor or outdoor mounting
■ Accepts up to #2 AWG wire
■ Multiple knockouts and two ground terminals
■ Higher HP models require heavy duty pressure switches - See Magnetic Contactor version to use standard pressure switches
■ Manual reset overloads on 1½ - 5 HP models

FEATURES

■ 304 SS casing and end bells for corrosion resistance
■ Kingsbury type, 3 shoe, thrust bearing, see chart for ratings
■ Stainless steel, 17-4 PH splined shaft
■ Removable, replaceable motor leads, 48" (½ - 2 HP) or 100" (3 - 7.5 HP)
■ Water lubricated with filter/check valve to maintain fluid fill
■ Lightning and surge protection built-in on 200 V and 230 V models.
■ Magnetic starter with Class 10, quick-trip overload protection required.
■ U.L. 778 Recognized
■ CSA Certified
■ NEMA Mounting Dimensions

Water-Reels® are manufactured by Kifco/Ag-Rain Incorporated, one of the oldest traveling irrigation manufacturers in the U.S.A. With more than 15,000 machines in operation and 40 years in business, Kifco/Ag-Rain manufactures two lines of irrigation systems. Our Ag-Rain Water-Reels® are the larger Agriculture Irrigation Systems, A-Series machines, are used to irrigate larger acreage areas. Kifco Water-Reels® are the smaller Turf Irrigation Systems, B-Series machines, used to irrigate sport complexes, horse arenas and residential sites. If you have any questions, please feel free to contact us. For your portable irrigation system, choose the economical, reliable, easy to operate Water-Reel® made by Kifco, Inc. in Havana, Illinois.

Norwesco is the world's largest manufacturer of molded poly tanks. For over 25 years, our customers have relied on Norwesco tanks for premium quality and reliability in performance. Norwesco tanks are manufactured to strict quality guidelines to ensure years of high-performance use. Norwesco's rugged, impact-resistant, one-piece seamless polyethylene tank construction is suitable
for the storage and/or transport of most liquid chemicals. Norwesco tanks are manufactured using resins that meet FDA specifications to ensure safe use as potable water storage tanks. Norwesco tanks will be delivered to you with a fitting installed when applicable, but may also be ordered without a fitting.

Vertical storage tanks are most frequently used for bulk storage and mobile nursing applications. Norwesco vertical tanks feature
tie-down slots, built-in graduated gallon indicators, an offset fill-opening and a self-vented, slosh-proof lid.

The American-Marsh submersible turbine pumps are designed for long, dependable life in many
applications. Modern processing methods require modern pumping equipment to satisfactorily
handle the many and varied fluids used in the various industries. American-Marsh Engineers,
backed by over 125 years of manufacturing experience, have met this demand with the vertical
turbines offered today. We have incorporated in our design, ideas and suggestions from
competent engineers from all sections of the country.

The American-Marsh Vertical Turbine pumps are designed for long, dependable life in many
applications. Modern processing methods require modern pumping equipment to satisfactorily
handle the many and varied fluids used in the various industries. American-Marsh Engineers,
backed by over 125 years of manufacturing experience, have met this demand with the vertical
turbines offered today. We have incorporated in our design, ideas and suggestions from
competent engineers from all sections of the country.

AMERICAN MARSH PUMP SELECTION SOFTWARE

FEATURES

■ Discharge Bowl: Several discharge sizes available (NPT).
■ Discharge Bearing: Extra long sealed top bronze bearing insures shaft alignment and stabilization for extended life.
■ Intermediate Bowl: Class 30 cast iron. Glass coating on 6" and larger bowls for maximum effi ciency and abrasion resistance.
■ Intermediate Bearings: Available in either no-lead bronze or rubber.
■ Impellers: Designed for maximum effi ciency with a wide range hydraulic coverage. Made of low zinc and no lead material suitable for drinking water applications.
■ Taperlock: Accurately machined to ensure positive locking of the impeller to the pump shaft.
■ Upthrust Collar: Designed with extra margin of safety against momentary upthrust at start-up.
■ Suction Adapter: Designed to ensure proper pump/motor alignment. Open area permits easy access to pump/motor coupling. Casting made of ductile iron for increased strength.
■ Pump to Motor Coupling: Stainless steel coupling accurately machined for perfect alignment, balance and power transmission.
■ Pump Shaft: 100,000 PSI high tensile type 416 stainless steel provides strength and corrosion resistance. Ground and polished for smooth bearing surface.
■ Powered for Continuous Operation: All horsepower ratings are within the service limits of the motor and pump can be operated continuously without fear of damage to the motor.

Short set turbines are used in many many market applications. Their versatility and durability are why they are installed every day.  Whether in a wet pit pump application or as a canned booster pump, Goulds knows how to make them.

Capabilities

• Capacities to 20,000 GPM (4545 m3/hr)
• Heads to 1,500 feet (457 m)
• Bowl sizes from 5" to 30"

Design Features

• Product lube or enclosed lineshaft design.
• Cast or fabricated discharge head and flanged or threaded column assembly.
• 416 SS shafting. Other alloys available.
• Standard cast iron bronze fitted construction. Ductile iron, Ni Al brz, 316 SS or other alloys available.
• Taperlock or keyed impeller design.
• Wear rings optional.
• Packing or mechanical seal design.
• Built-in alignment and simple piping for less costly installation and ease of maintenance/reduce downtime.

Services

• Raw Water Intake
• Pumping Station
• Cooling Water
• Commercial/Industrial
• Municipal
• Mining

FEATURES

■ Discharge Bowl: Discharge available in NPT thread or flanged.
■ Discharge Bearing: State of the art thermoplastic water lubricated bearing is standard. Bronze greasepacked sealed bearing complete with 316SS plug available on request.
■ Intermediate Bowl: Heavy duty design and investment cast for industry leading durability and efficiency.
■ Impeller: Wide range of hydraulic coverage designed for maximum efficiency.
■ Thrust Washer: Designed with an extra margin of safety against upthrust at start up.
■ Intermediate Bowl Bearing: State of the art thermoplastic sleeve bearings are standard. Self-flushing rubber bearing is available on request.
■ Taper Locks: Precision machined to ensure positive locking of impeller to pump shaft.
■ Suction Inlet: Hydrodynamic design ensures smooth entrance flow. Oversized inlet strainer prevents solids from entering hydraulic assembly.
■ Suction/Motor Adapter: Heavy duty casting designed for strength, corrosion resistance, easy access to pump/motor coupling, and ensure motor alignment.
■ Pump to Motor Coupling: Precision machined and balanced for perfect alignment and power transmission.
■ Pump Shaft: Designed for maximum strength and excellent corrosion resistance. Turn, ground and polish providing a smooth bearing surface.
■ Check Valve: ITT/Goulds Pumps also offer 316 SS check valve with NPT threads.
■ Powered for Continuous Operation: All hydraulic ratings are within the motor power ratings.

Features:

■ 1-1/2" - 10" discharge sizes
■ Capacities to 7000 GPM, 480' TDH
■ Horsepower: Up to 200 HP
■ Standard ductile iron construction with bronze wear ring and sleeve
■ Replaceable wear rings
■ Superior NPSH characteristics
■ 150# rated fl at faced fl anges
■ Heavy wall construction
■ Grade 5 capscrews
■ HC75 & HC10 Series- Enclosed impellers, internally hydraulically balanced
■ Double volute on HC10x10-14, for balanced radial forces,HC14 Series- External balance line standard
■ Standard with graphite packing or single mechanical seal

Features:

■ 4 performance ranges - 35, 45, 60 and 90 gpm.
■ Stainless steel discharge head and motor bracket.
■ High fl ow impellers and stages are glass-filled Noryl® for maximum effi ciency.
■ Ceramic shaft sleeve and rubber discharge bearing eliminates sand wear.
■ Intermediate bearing for increased shaft stability.
■ Floating eye and hub seals for improved performance and effi ciency.
■ Stainless steel hex pump shaft, shell and shaft coupling.
■ High capacity upthrust assembly for protection during start-up and operation (45, 60 and 90 gpm models).
■ Powered by Franklin's corrosion-resistant 4" submersible motors.
■ 2" NPT discharge
■ Check valve must be ordered separately.

Ideal for farm, home, irrigation, industry, municipal and commercial applications, equipped with the power, performance and reliability you expect from Franklin Electric. Flow ratings of 50, 75, 100 and 125 gpm with TDH up to 1200 ft. Horsepower ranges from 1-1/2 to 40 hp

Features:

■ Heavy-duty stainless steel discharge head and motor bracket.
■ Stainless steel shaft, shell, intake screen and cable guard provides corrosion resistance and longer pump life.
■ Glass-fi lled Noryl® impeller stage assemblies provide exceptional strength and durability.
■ Ceramic shaft sleeve and rubber discharge bearing minimizes bearing wear and shaft misalignment.
■ 3" NPT heavy-duty stainless steel discharge head.
■ Modular motor bracket enabling 4" or 6" motor mount for 5-10 hp units.
■ One year unconditional warranty against failure from sand locking in abrasive well conditions.

The V6 Booster Pump is ideal for industrial/commercial applications where water pressure boosting is required. Designed with Premium hydraulics for reliability and excellent performance. The V650 is available in 1.5 hp through 7.5 hp models. The V675 is available in 3 hp through 7.5 hp models.

The Turf Boss excels when used to supply water to a timer operated irrigation system, but the rugged, easily serviced pump can be used in other areas as well. Some of which are residential water transfer, commercial dewatering, rainwater drainage, light agricultural irrigation, sump drainage, and industrial liquid transfer. As a premium self-priming sprinkler pump the Turf Boss is approved for indoor or outdoor operation through CSA and UL.  Whether it is a sprinkler system, a construction site, or a water transfer tank, when moving high volumes of water the Turf Boss guarantees the right amount of water right on time.

Flooded suction centrifugal pump suitable for usewith saltwater, chemical transfer, and other pumping applications that deal with corrosive substances.

Features:

■ High tech, non-corrosive plastic construction. All metal components that have contact with liquid are stainless steel.
■ Motor shaft is completely insulated from any contact with pumping liquid.
■ 2" union connections ensure easy service and optimum water flow. Unions must be ordered separately.
■ Discharge port easily rotates to 90 degree increments without removing motor.
■ Lightweight design.

The Franklin 4-inch Super Stainless motor has been the driving force behind residential and light commercial submersible pumps for decades. Designed and patented in 1950 by our founder, Ed Schaefer, this motor has proven to be the industry's most trusted residential pump motor.

Franklin offers 4-inch motors in a full line of single- and three-phase voltages, frequencies, and application-specific models. Wherever there is an independent source of clean groundwater, you can find a Franklin motor. Typical applications that rely on our motors include:

* Homes
* Farms
* Restaurants
* Schools
* Small Factories
* Coalbed Methane Recovery
* Car Washes
* Fountains

Features:

* Corrosion-resistant construction
* Stainless steel splined shaft
* Hermetically-sealed windings
* StatorShield resin system
* Filter check valve
* Water lubrication
* Kingsbury-type thrust bearing
* Pressure-equalizing diaphragm
* Sand fighting slinger
* Built-in lightning arrestors (single-phase)
* New lead assembly
* Franklin-manufactured control boxes available for single-phase motors
* UL 778 recognized (North American voltages)
* CSA certified
* ANSI/NSF 61 certified
* Industry standard NEMA mounting dimensions

Special Options

* 316 SS Construction - Special construction option for corrosive applications, including acids, low pH and seawater.
* SandFighter^TM Construction - Special construction option for sandy water wells. Motors include SandFighter^TM sealing system with silicon carbide mechanical shaft seal and are warranted against sand entry failure.
* Coalbed Methane Construction - Special construction option for coalbed methane wells. Includes Sand Fighter sealing system, reinforced diaphragm housing to resist damage from bottom tagging and protective filter to shield diaphragm from debris.
* Oil Stripper Construction - Special construction option for secondary oil recovery wells where there is a mixture of oil and water. They are also suitable for geothermal and other water well applications where high temperatures and/or high pH conditions exist. Three-phase Oil Stripper motors are equipped with Subtrol heat sensor for use with SubMonitor protection devices.

The outline of a 1950's vertical pump motor and discharge head forms the basis Mather Pumps logo.  We have been dealing with electric vertical pump motors for turbine pumps since our inception, and there's not a more robust type of product available.  When it comes to experience and quality in the electric motor industry, Emerson's U.S. Motors® brand has a proven history of success, particularly with vertical turbine pump motors. With one of the largest installed bases throughout the world, one brand stands alone for vertical electric motors, U.S. Motors®.

MODIFICATIONS AVAILABLE TO HIGH THRUST MOTORS

• Non-Reverse Ballomatic® Ratchet or Self Release Coupling
• Various Coupling Sizes Available at no additional charge
• Multiple Base Sizes Available at no additional charge

MODIFICATIONS AVAILABLE TO INVERTER DUTY
320 FRAME AND LARGER STOCK PRODUCT

• Bearing Resistance Temperature Detectors (RTD)
• 175% Extra High Thrust
• Vibration Switches
• Water Cooling Coils

The outline of a 1950's vertical electric pump motor and discharge head forms the basis Mather Pumps logo.  We have been dealing with vertical pump motors for turbine pumps since our inception, and there's not a more robust type of product available.  When it comes to experience and quality in the electric motor industry, Emerson's U.S. Motors® brand has a proven history of success, particularly with vertical turbine pump motors. With one of the largest installed bases throughout the world, one brand stands alone for vertical electric motors, U.S. Motors®.

MODIFICATIONS AVAILABLE TO HIGH THRUST MOTORS

• Non-Reverse Ballomatic® Ratchet or Self Release Coupling
• Various Coupling Sizes Available at no additional charge
• Multiple Base Sizes Available at no additional charge

MODIFICATIONS AVAILABLE TO INVERTER DUTY
320 FRAME AND LARGER STOCK MOTORS

• Bearing Resistance Temperature Detectors (RTD)
• 175% Extra High Thrust
• Vibration Switches
• Water Cooling Coils

Variable speed drives pump systems have taken the industry by storm, and we whole heartedly endorse them...but only for the right application. Designing a pump system with variable speed drives takes a serious amount of expertise. We never approach drives as one size fits all solutions; instead we are going to evaluate your pumping needs carefully before recommending the costly addition of a variable speed drive (VFD). You can be sure that when we do recommend a variable speed drive that it will add value to your pump system, protect your equipment and probably reduce your total cost of ownership. When evaluating drive providers Mather Pumps brings essential and hard to find substance to your project by understanding how complex drives control and affect your critical pump system investment. In addition, variable speed pump drives rarely stand on their own. We are able to integrate them with other important pieces of electrical pump control and safety equipment to make a motor control center specifically for your pump system. Call us today to talk about your variable speed drive pump project.

Simflo's bowls range size from 4" to 28", capable of producing from 5 gallons per minute to 18,000 gallons per minute at up to 1,500' of head. Submersible discharge heads are available with 2" to 12" outlets. Simflo's products can be had in a wide range of materials including cast iron, ductile iron, cast steel, NI-resist, NI-hard, bronze alloys (including aluminum-bronze), stainless steels and heat treated aluminum. Many bowl modifications are available, including: wear rings (bronze, aluminum-bronze, 304-316-416 stainless steels, NI-resist, Teflon, ceramic, etc.); grease-packed bearings; hard-chrome plated 416 stainless steel bowl shafting and extra length bearings.

Simflo Online Pump Selection

Simflo's bowls range size from 4" to 28", capable of producing from 5 gallons per minute to 18,000 gallons per minute at up to 1,500' of head. Standard cast iron discharge heads are available with 3" to 10" outlets, fabricated steel heads can be custom configured with 2" to 30" outlets. Submersible discharge heads are also available with 2" to 12" outlets.

Simflo's products can be had in a wide range of materials including cast iron, ductile iron, cast steel, NI-resist, NI-hard, bronze alloys (including aluminum-bronze), stainless steels and heat treated aluminum. Many bowl modifications are available, including: wear rings (bronze, aluminum-bronze, 304-316-416 stainless steels, NI-resist, Teflon, ceramic, etc.); lateral machining for deep settings in excess of 1,000'; grease-packed bearings; hard-chrome plated 416 stainless steel bowl shafting and extra length bearings.

Simflo Online Pump Selection

If you're looking for a below ground septic or cistern tank you're sure to find it among our wide selection. The rotational molding process allows for a one-piece, seamless polyethelene tank that is rugged and impact resistant. Our tanks are manufactured to strict quality guidelines to ensure years of high-performance use.

Quality, price, product line and leading edge technology make NORWESCO North America's largest manufacturer of rotationally molded polyethelene tanks.

Pressure tanks are a critical piece of your pump system.  In general, without a properly functioning pressure tank in your system, you get rapid pump cycling.  This rapid pump starting and stopping quickly destroys the pump motor.  Water system pressure tanks, no matter what the size, keep your pump from rapidly turning on and off.  The bigger the tank the better, meaning that the larger the tank you have, the less your pump will turn on and off, making it last longer.  Tanks are not only sized to go with the capacity of your pump, but the larger they are past minimum requirement the more they will help your pump last as long as possible.  We stock many different sizes of pressure tanks for all sorts of applications.

Amtrol Pressure Tanks                Residential Pressure Tanks       

Industrial Pressure Tanks                       ASME Rated Tanks

• Sensitive and Accurate Pressure Control
• Easy Adjustment and Maintenance
• Tamper Resistant
• Optional Check Feature
• Fully Supported Frictionless Diaphragm

The Cla-Val Model 90-01/690-01 Pressure Reducing Valve automatically reduces a higher inlet pressure to a steady lower downstream pressure, regardless of changing flow rate and/or varying inlet pressure. This valve is an accurate, pilot-operated regulator capable of holding downstream pressure to a pre-determined limit. When downstream pressure exceeds the pressure setting of the control pilot, the main valve and pilot valve close drip-tight.

If a check feature is added, and a pressure reversal occurs, the downstream pressure is admitted in the main valve cover chamber, closing the valve to prevent return flow.

Typical Applications

Typical applications include pressure reducing valve station using Model 90-01BY/690-01BY and Model 90-01AS/690-01AS in parallel to handle wide range of flow rates. Larger Model 90-01BY/690-01BY valve meets requirements of peak loads and smaller Model 90-01AS/690-01AS handles low flows.